aikace-aikace

Daya, itace filastik bene WPC

WPC ta haɗu da juriya na ruwa da kwanciyar hankali na LVT yayin da yake da sauƙin shigarwa kamar bene na laminate

Ƙarin abin toshe kwalaba da fatun EVA yana ba da mafi kyawun jin ƙafa da murfi idan aka kwatanta da benen latch na LVT.

WPC an yi shi da duk kayan kore, waɗanda suka fi dacewa da muhalli fiye da shimfidar laminate.

A takaice: WPC tana ba da mafi kyawun duniyoyin biyu, LVT da Laminate.

1. Abun ciki

WPC: Haɗin Filastik na itace = LVT Layer + WPC Core

1.1.1 The LVT Layer na WPC da WPC Layer suna bonded da manne, da kuma peeling ƙarfi ne har yanzu da kyau sosai, har ma fiye da bonding ƙarfi na LVT launi fim Layer da sanyi takardar bayan zafi latsa.

1.1.2WPC yana da mafi kyawun kwanciyar hankali fiye da PVC:

An fallasa bene na WPC zuwa babban zafin jiki na digiri 80 da ko rage digiri 2 na sa'o'i 6, sa'an nan kuma sanya shi a yanayin zafi na al'ada na digiri 23 da ko rage digiri 2 da zafi na 50% na sa'o'i 24.An yanke hukunci mai zuwa:

Tsawon shrinkage shine 0.11%

Raunin fadin shine 0.07%

Girman: 0.25mm

LVT: 0.08-0.15%

Girman: 0.5-1.2mm

2. Amfanin WPC

WPC Injiniya Vinyl Flooring - WPC farashin zinari ne, 5.5mm WPC shine ainihin farashi iri ɗaya da maƙallan Vinyl 5.0mm da samfuran da ba su da manne, amma sama da maɓallin sihiri, kuma mafi girma fiye da manne da aka wanke da shimfidar PVC na yau da kullun (nau'in manne goge) .

Kudin shigarwa na WPC yana da ƙasa da na talakawa gogaggen PVC bene, ƙasa da na talakawa PVC kulle bene, da shigarwa kudin da ba m PVC bene, sihiri zare da kuma wanke PVC bene ne kadan daban-daban;

WPC mai hana ruwa yana da kyau sosai, filastik itace wannan Layer na hana ruwa shima yana da ƙarfi sosai, akasin haka, buckle ɗin sihiri, manne wanki, nau'in goga na yau da kullun na PVC ƙasa saboda ya haɗa da manne, tasirin hana ruwa gabaɗaya;

Sauƙaƙan shigarwa, WPC saboda hanyar shigarwa na Angle-Tap, in mun gwada da dacewa, dacewa da DIY, ba shakka, buƙatar goge farashin Dry baya a wannan batu shine mafi muni.

WPC ba shakka yana da kyau a cikin yanayin shiru da jin ƙafa, musamman tare da abin toshe kwalaba ko matashin EVA WPC;

Hakanan WPC tana da kyau ta fuskar kare muhalli, gami da iskar formaldehyde, karafa masu nauyi, musamman ma gwajin isa ga 144 duk sun wuce.

WPC bene yana da rauni ta fuskar sake amfani da shi bayan amfani, saboda WPC (WoodPlastic) ba za a iya sake yin fa'ida da sake amfani da shi ba.Za a iya sake yin amfani da bene na PVC na wasu samfuran kuma a ci gaba da amfani da su azaman kayan sake yin amfani da su

Ana iya amfani da tarin azaman kayan dawowa

3. Abubuwa da yawa waɗanda ke buƙatar kulawa a cikin sadarwa tsakanin WPC da abokan ciniki

(1) Saboda LVT Layer na WPC gabaɗaya lokacin kauri ne kawai 1.5mm, ƙwayar farantin ya kamata ya zama ɗan lebur gwargwadon yiwuwa.Kar a yi riko na hannu da Classic slate (Slate), kuma adadin latsawa da mannewa nakasassu zai yi girma sosai.

(2) Farashin 6.0MM itace-roba Layer ne 1.8 daloli mafi girma a kowace murabba'in mita fiye da na 5M itace-roba Layer.

WPC+2.0mm EVA Form: Farashin + USD1.00SQM

WPC+1.5mm Cork: Farashin +USD1.50SQM

(3) The LVT Layer na WPC da WPC Layer an bonded da manne, peeling ƙarfi ne har yanzu da kyau sosai, har ma fiye da bonding ƙarfi na LVT launi fim Layer da frosted takardar ta zafi latsa.

(4) Don girman WPC, wasu na iya ambata cewa ana buƙatar faɗin 143mm, wanda kuma shine faɗin samfuranmu a baya.Koyaya, bayan gwaji da ƙwarewar samarwa da yawa, asarar 143mm yana da girma sosai, don haka an canza shi zuwa 146mm, ƙarancin lalacewa yana nufin ƙananan farashi.

(5) Lokacin shirya samfurin WPC, musamman ma lokacin da ake buƙatar dukan samfurin, da fatan za a haɗa shi da kanku don ganin ko akwai matsala.Wasu samfurori a farkon matakin suna da lahani, don haka yana da kyau a yi ƙananan samfurori, amma dukan yanki na iya samun matsaloli kamar bambancin tsayi da kuma kabu mai karkata lokacin haɗuwa, don haka da fatan a tabbatar da tabbatarwa kafin aikawa.In ba haka ba, tasirin zai zama mafi muni.

Biyu, dutse filastik bene SPC:

Dutsen plactic SPC (Stone plactic composite), wani sabon nau'in bene na kare muhalli wanda aka haɓaka bisa manyan fasaha, tare da sifili formaldehyde, tabbacin mildew, tabbacin danshi, wuta, hujjar kwari, shigarwa mai sauƙi da sauransu.SPC bene ne Ya sanya daga extruder hade da T-mold extrusion PVC substrate, tare da uku ko hudu nadi calendering inji bi da bi PVC lalacewa-resistant Layer, PVC launi fim da PVC substrate, daya-lokaci dumama laminating, embossing kayayyakin, sauki tsari, laminating by zafi don kammalawa, kada ku buƙatar manne.Kayan bene na SPC suna amfani da dabarar abokantaka na muhalli, baya ƙunshi ƙarfe mai nauyi, phthalates, methanol da sauran abubuwa masu cutarwa, daidai da EN14372, EN649-2011, IEC62321, GB4085-83 ka'idoji.A Turai da Amurka kasashen da suka ci gaba da kuma kasuwar Asiya-Pacific ta shahara sosai.Tare da kyakkyawan kwanciyar hankali da dorewa, shimfidar filastik na dutse ba wai kawai yana magance matsalar lalata damp da mildew na katako mai ƙarfi ba, har ma yana magance matsalar formaldehyde na sauran kayan ado.Ya dace da kayan ado na cikin gida, otal-otal, asibitoci, manyan kantuna da sauran wuraren jama'a.

SPC bene shrinkage rate: ≤1‰ (bayan tempering jiyya), ≤2.5‰ (kafin tempering jiyya), (shrinkage gwajin misali: 80 ℃, 6-hour misali);

Girman bene na SPC: 1.9 ~ 2 ton / cubic mita;

Fa'idodin bene na SPC: SPC alamomin zahiri na zahiri sun tabbata kuma abin dogaro, alamomin sinadarai cikin layi tare da ƙa'idodin ƙasa da ƙasa;

SPC kasa rashin amfani: SPC yawa kasa, nauyi nauyi, high kudin sufuri;

Production SPC bene da LVT, WPC bene kwatanta: SPC bene aiki, masana'antu tsari ne mai sauki.

Amfanin bene na kare muhalli na SPC:

SPC bene sabon nau'in samfuran kayan kariyar muhalli ne, fa'idodinsa kamar haka:

(1) hana ruwa da danshi.Yana magance matsalar da gaske cewa samfuran itace suna da saurin lalacewa, haɓakawa da lalacewa bayan shayar da ruwa a cikin rigar da yanayin ruwa da yawa.Ana iya amfani da shi a cikin yanayin da ba za a iya amfani da kayan itace na gargajiya ba.

(2) Rigakafin kwari da kwari, kawar da cutar da kwari yadda ya kamata, tsawaita rayuwar sabis;

(3) Launi, akwai launuka da yawa don zaɓar daga.Ba wai kawai yana da dabi'ar itace na halitta da rubutun itace ba, amma kuma zai iya tsara launi bisa ga halinsu;

(4) Ƙarfin filastik mai ƙarfi, na iya zama mai sauqi qwarai don cimma ƙirar ƙirar mutum, cikakken nuna salon halin mutum;

(5) Babban kariyar muhalli, babu gurɓata ruwa, mara gurɓataccen gurɓataccen abu, mai sake yin amfani da shi.Kayayyakin ba su ƙunshi benzene da formaldehyde ba, don kayayyakin kare muhalli, ana iya sake yin amfani da su sosai, ta hanyar amfani da itace, wanda ya dace da dorewar ci gaban manufofin ƙasa, amfanin al'umma;

(6) Babban juriya na wuta.Za a iya yin amfani da harshen wuta yadda ya kamata, darajar wuta har zuwa B1, idan wuta ta kashe kanta, ba ta haifar da wani gas mai guba;

(7) Kyakkyawan machinability, customizable, planing, sawing, hakowa, surface za a iya fentin;

(8) Sauƙaƙe mai sauƙi, ginin da ya dace, ba sa buƙatar fasahar gini mai rikitarwa, adana lokacin shigarwa da farashi;

(9) babu fasa, babu fadada, babu nakasu, babu kiyayewa da kiyayewa, mai sauƙin tsaftacewa, adana gyare-gyare na baya da farashin kulawa;

(10) Kyakkyawan tasirin tasirin sauti mai kyau, kyakkyawan tanadin makamashi, don adana makamashin cikin gida har zuwa fiye da 30%;

(11) SPC bene dangi da LVTWPC bene zuba jari kudin kasa da sauri sakamako, kasa aiki, kananan ƙarfin aiki, tsabta muhalli.

Tsarin samar da bene na SPC:

Hanya: 1. Cakudawa

Dangane da rabo daga albarkatun kasa atomatik metering → babban gudun mahaɗin zafi hadawa (zafi hadawa zazzabi: 125 ℃, sakamako

Shin abubuwa iri-iri suna haɗe daidai, kawar da ruwa a cikin kayan) → a cikin cakuda sanyi (don kwantar da kayan,

Hana caking da discoloration, sanyi hadawa zafin jiki: 55 ℃.→ An haɗa kayan aiki daidai da sanyaya;

Mataki 2: Extrusion

Ƙara tagwayen dunƙule extruder, zafi extrusion → shigar da takardar mutu shugaban extrusion gyare-gyaren, forming takardar.

Bayan kalandar mirgine huɗu, kayan tushe yana kauri → fim ɗin launi mai launi → liƙa mai jurewa lalacewa → sanyaya → yanke;

Mataki na 3: zafin UV

Surface UV → tempering (zazzabi zafin ruwan zafi: 80 ~ 120 ℃; Ruwan sanyi: 10 ℃)

Mataki na 4: Tsara + shiryawa

Slitting, slotting, datsa, chamfering, gwaji, marufi

Tsarin bene na SPC (Farashin ƙira 2200 yuan/ton)

Abin da ke sama shine ainihin dabarar bene na SPC, ƙirar masana'antun daban-daban sun ɗan bambanta